Ultrasonic(Thermostat) Ink Tank

1. Clean the inner part of the tank with solvent . Avoild liquid flow into the bottom part of the tank .

2. Pour the ink into the tank and screw up the cover tightly . Please keep the ink level between "Min." and "Max" .

3. Unscrew the Ink tube port and put the ink tube from the printer into the tank and screw up the Ink tube port tightly . The end of the tube should be lower than "Min." level.

4. Plug on the power cable and switch on . It will running automatically .

5. When the printer does not work , please switch it off .

Caution :